ZynqMP-FPGA-Ubuntu20.04

Overview

Introduction

This Repository provides a Linux Boot Image(U-boot, Kernel, Ubuntu 20.04 Desktop) for Zynq MPSoC.

Features

• Hardware
  • Ultra96 : Xilinx Zynq UltraScale+ MPSoC development board based on the Linaro 96Boards specification.
  • Ultra96-V2 : updates and refreshes the Ultra96 product that was released in 2018.
  • KV260 : Kria KV260 Vision AI Startar Kit.
• Boot Loader
  • FSBL(First Stage Boot Loader for ZynqMP)
  • PMU Firmware(Platform Management Unit Firmware)
  • BL31(ARM Trusted Firmware Boot Loader stage 3-1)
  • U-Boot xilinx-v2019.2 (customized)
• Linux Kernel Version v5.10.0
  • linux-xlnx tag=xilinx-v2021.1
  • Enable Device Tree Overlay with Configuration File System
  • Enable FPGA Manager
  • Enable FPGA Bridge
  • Enable FPGA Reagion
  • Enable ATWILC3000 Linux Driver for Ultra96-V2
  • Enable CIFS (Common Internet File System)
  • Enable Xilinx APF Accelerator driver
  • Enable Xilinx APF DMA engines support
• Ubuntu20.04(focal) Desktop Root File System
  • Installed build-essential
  • Installed ubuntu-desktop
  • Installed lightdm
  • Installed ruby python python3
  • Installed Other package list -> files/ubuntu20.04-desktop-dpkg-list.txt

Install

Install to SD-Card

• Ultra96
• Ultra96-V2
• KV260

Setup Ultra96/Ultra96-V2/KV260 borad

• Put the SD-Card in the slot on Ultra96/Ultra96-V2/Kv260.
• Plug in your Display Port monitor into the Ultra96 using the mini Display Port connector.
• Plug in a USB mouse and USB keyboard into the USB ports of the Ultra96/Ultra96-V2/Kv260.

Starting Ultra96/Ultra96-V2/KV260 board

• Turn on the Ultra96/Ultra96-V2/KV260.
• After a few seconds, the Ubuntu login screen will appear on the display.
• Your username is "fpga". Password is set to "fpga". Please login.
• The password for administrator rights is "admin".

FAQ

• Change system console
• Change boot runlevel

Build

• Build Boot Loader
  • Ultra96
  • Ultra96-V2
• Build Linux Kernel
• Build Ubuntu 20.04 Desktop RootFS