Cooling FAN HAT for OrangePi ZERO.
It's possible to attach 25mm/30mm FAN on your board.
You can order your PCB by yourself.
30mm Fan TypeA
30mm Fan TypeB
Left:30mm TypeB
Right:30mm TypeA
25mm Fan
Zip the files in the garbar folder.
There are no restrictions on the ZIP file name.
These files can be viewed using the Gerber Viewer.
https://sourceforge.net/projects/gerbv/
You can order by Elecrow or FusionPCB using these file.
This is my order (to Elecrow) information.
This HAT has IR Receiver Circuit.
R1:200 Ohm(1/6W)
R2:100 Ohm(1/6W)
R3:100 Ohm(1/6W)
C1:47uF
J5:Fan Power
J3:IR receiver module(Vcc,Gnd,Data)
Time,IP Address(Last 2 Octet),CPU Temp.
Line#1:ZERO PCB Rev 1.1 without FAN.
Line#3:ZERO PCB Rev 1.4 without FAN.
Line#4:ZERO PCB Rev 1.4 with FAN.
LeftUpper:ZERO PCB Rev 1.1 without FAN.
RightMiddle:ZERO PCB Rev 1.4 without FAN.
LeftLower:ZERO PCB Rev 1.4 with FAN.
A metal spacer for cooling is being installed in all boards.