20040202: Drawing circles or arcs as part of map boundaries

Hi

Is there a way to draw circles or arcs when creating maps in McIDAS?  At 
the moment I'm plotting approximate lat/lons.

Thanks,
Karen

Karen Pon
Defence Meteorological Support Unit
Ph:  (08) 8920 3860
Fax: (08) 8920 3861
Email: address@hidden (group alias) 

Date: Mon, 02 Feb 2004 08:57:38 -0600
From: Scott Lindstrom <address@hidden>

I'm not sure what you're trying to do, but....

If you have a set of points in the x,y plane that is your frame,
you can draw a line through them.  If those points define a circle
or arc, then you draw a circle or arc.

There is no way to give the equation of a circle to the graphics
routine and have the graphics routine draw the circle -- you
have to compute the points on the circle.  The graphics routine
doesn't do that.

For your example, if you compute the longitude every .1 degree
along a latitude circle, and draw a line through those points,
you'll get an arc-like line.

I hope that's a clear explanation.

Scott

Date: Mon, 02 Feb 2004 09:37:01 -0600
From: Rick Kohrs <address@hidden>

The DIST command allow you to draw circles and the CIRCLE command (in 
Mc-XRD) allow you to draw arcs.

Rick

From: "HOETH, BRIAN R. (JSC-ZS) (LM)" <address@hidden>
Subject: RE: Drawing circles or arcs as part of map boundaries
Date: Mon, 2 Feb 2004 12:01:27 -0600 

Hello,

I think what Karen is asking for is something that I had actually asked
awhile back too?  Is there a way to make a circle AND create a McIDAS map
file from this circle?  Someone here created a "quick and dirty" program
that will make a 5 nautical mile circle around the Johnson Space Center and
then create a McIDAS map file for this circle.  The program is hard-coded to
work only for JSC's lat/lon and would obviously be more useful if it were
able to handle lat/lon and maybe a radius as input.  

Anyways, I've attached the program.  It's a very small C program that you
can run from a unix environment.  Hope this helps and let me know if you end
up modifying it to use keywords!

Brian Hoeth
Spaceflight Meteorology Group
Johnson Space Center, Houston, TX
Office:  281-483-3246
Operations:  281-483-1051

Date: Thu, 05 Feb 2004 21:46:12 +0930
From: Karen Pon <address@hidden>
Subject: RE: Drawing circles or arcs as part of map boundaries

Hi

Thanks for all of your suggestions.  I'll try out various options.

Karen

From: Russ Dengel <address@hidden>
Date: Tue, 10 Feb 2004 08:15:29 -0600

Just to add my $0.02 on this topic. The CIRCLE command in McIDAS XRD 
does all of this and more. It will plot radial distances from any Earth 
location (lat/lon, WMO station, world city, or current cursor). It can 
display radials at any distance with labeled bearing markers, and for 
certain satellite projections, display parallax shift to a specified 
height above the surface.

It has a comprehensive set of plotting controls for color, dashing, line 
width and labeling.

Russell Dengel

From: "HOETH, BRIAN R. (JSC-ZS) (LM)" <address@hidden>
Date: Thu, 12 Feb 2004 09:43:24 -0600

Russ,

But does the CIRCLE command have the functionality to save the circle drawn
as a MAP file?

Brian

From: Russ Dengel <address@hidden>
Date: Thu, 12 Feb 2004 10:07:17 -0600

    No, the Earth to frame projection computations are performed by 
CIRCLE. Since MAP does basically the same thing (converts Lat/Lon to 
frame coordinates) I never inserted the option to save the results to a 
MAP file. This allows the user to adjust the scaling based on image 
resolution and allows CIRCLE to adjust placement of labels. MAP contains 
no concept of radial labeling.

    Russ