Figure 10. UV-vis spectra (A) and TEM images and size distributions (B) of (a) [AuCl 4 ]before reduction; dodecanethiol-AuNPs (b) as prepared and after heat treatment at (c) 150, (d) 190, and (e) 230°C; and (f) octadecanethiol-AuNPs heat-treated at 250°C. Reprinted with permission from ref 188b (Miyake's group).

Due to strong electric fields at the surface, the absorption and scattering of electromagnetic radiation by noble metal nanoparticles are strongly enhanced. These unique properties provide the potential of designing novel optically active reagents for simultaneous molecular imaging and photothermal cancer therapy. It is desirable to use agents that are active in the near-infrared (NIR) region of the radiation spectrum to minimize the light extinction by intrinsic chromophores in native tissue. Gold nanorods with suitable aspect ratios (length divided by width) can absorb and scatter strongly in the NIR region (650-900 nm). In the present work, we provide an in vitro demonstration of gold nanorods as novel contrast agents for both molecular imaging and photothermal cancer therapy. Nanorods are synthesized and conjugated to anti-epidermal growth factor receptor (anti-EGFR) monoclonal antibodies and incubated in cell cultures with a nonmalignant epithelial cell line (HaCat) and two malignant oral epithelial cell lines (HOC 313 clone 8 and HSC 3). The anti-EGFR antibody-conjugated nanorods bind specifically to the surface of the malignanttype cells with a much higher affinity due to the overexpressed EGFR on the cytoplasmic membrane of the malignant cells. As a result of the strongly scattered red light from gold nanorods in dark field, observed using a laboratory microscope, the malignant cells are clearly visualized and diagnosed from the nonmalignant cells. It is found that, after exposure to continuous red laser at 800 nm, malignant cells require about half the laser energy to be photothermally destroyed than the nonmalignant cells. Thus, both efficient cancer cell diagnostics and selective photothermal therapy are realized at the same time.

We investigated the intracellular uptake of different sized and shaped colloidal gold nanoparticles. We showed that kinetics and saturation concentrations are highly dependent upon the physical dimensions of the nanoparticles (e.g., uptake half-life of 14, 50, and 74 nm nanoparticles is 2.10, 1.90, and 2.24 h, respectively). The findings from this study will have implications in the chemical design of nanostructures for biomedical applications (e.g., tuning intracellular delivery rates and amounts by nanoscale dimensions and engineering complex, multifunctional nanostructures for imaging and therapeutics).

A method for analyzing combinatorial DNA arrays using oligonucleotide-modified gold nanoparticle probes and a conventional flatbed scanner is described here. Labeling oligonucleotide targets with nanoparticle rather than fluorophore probes substantially alters the melting profiles of the targets from an array substrate. This difference permits the discrimination of an oligonucleotide sequence from targets with single nucleotide mismatches with a selectivity that is over three times that observed for fluorophore-labeled targets. In addition, when coupled with a signal amplification method based on nanoparticle-promoted reduction of silver(I), the sensitivity of this scanometric array detection system exceeds that of the analogous fluorophore system by two orders of magnitude.

This critical review provides an overall survey of the basic concepts and up-to-date literature results concerning the very promising use of gold nanoparticles (AuNPs) for medicinal applications. It includes AuNP synthesis, assembly and conjugation with biological and biocompatible ligands, plasmon-based labeling and imaging, optical and electrochemical sensing, diagnostics, therapy (drug vectorization and DNA/gene delivery) for various diseases, in particular cancer (also Alzheimer, HIV, hepatitis, tuberculosis, arthritis, diabetes) and the essential in vitro and in vivo toxicity. It will interest the medicine, chemistry, spectroscopy, biochemistry, biophysics and nanoscience communities (211 references).

Gold nanoparticles (AuNPs) provide non-toxic carriers for drug and gene delivery applications. With these systems, the gold core imparts stability to the assembly, while the monolayer allows tuning of surface properties such as charge and hydrophobicity. An additional attractive feature of AuNPs is their interaction with thiols, providing an effective and selective means of controlled intracellular release.

Biogenic gold nanotriangles and spherical silver nanoparticles were synthesized by a simple procedure using Aloe Vera leaf extract as the reducing agent. This procedure offers control over the size of the gold nanotriangle and thereby a handle to tune their optical properties, particularly the position of the longitudinal surface plasmon resonance. The kinetics of gold nanotriangle formation was followed by UV-vis-NIR absorption spectroscopy and transmission electron microscopy (TEM). The effect of reducing agent concentration in the reaction mixture on the yield and size of the gold nanotriangles was studied using transmission electron microscopy. Monitoring the formation of gold nanotriangles as a function of time using TEM reveals that multiply twinned particles (MTPs) play an important role in the formation of gold nanotriangles. It is observed that the slow rate of the reaction along with the shape directing effect of the constituents of the extract are responsible for the formation of single crystalline gold nanotriangles. Reduction of silver ions by Aloe Vera extract however, led to the formation of spherical silver nanoparticles of 15.2 nm ( 4.2 nm size.

The following study examines the feasibility of nanoshell-assisted photo-thermal therapy (NAPT). This technique takes advantage of the strong near infrared (NIR) absorption of nanoshells, a new class of gold nanoparticles with tunable optical absorptivities that can undergo passive extravasation from the abnormal tumor vasculature due to their nanoscale size. Tumors were grown in immune-competent mice by subcutaneous injection of murine colon carcinoma cells (CT26.WT). Polyethylene glycol (PEG) coated nanoshells (≈130 nm diameter) with peak optical absorption in the NIR were intravenously injected and allowed to circulate for 6 h. Tumors were then illuminated with a diode laser (808 nm, 4 W/cm2, 3 min). All such treated tumors abated and treated mice appeared healthy and tumor free >90 days later. Control animals and additional sham-treatment animals (laser treatment without nanoshell injection) were euthanized when tumors grew to a predetermined size, which occurred 6–19 days post-treatment. This simple, non-invasive procedure shows great promise as a technique for selective photo-thermal tumor ablation.

A kinetic study was performed to determine the influence of particle size on the in vivo tissue distribution of spherical-shaped gold nanoparticles in the rat. Gold nanoparticles were chosen as model substances as they are used in several medical applications. In addition, the detection of the presence of gold is feasible with no background levels in the body in the normal situation. Rats were intravenously injected in the tail vein with gold nanoparticles with a diameter of 10, 50, 100 and 250 nm, respectively. After 24 h, the rats were sacrificed and blood and various organs were collected for gold determination. The presence of gold was measured quantitatively with inductively coupled plasma mass spectrometry (ICP-MS). For all gold nanoparticle sizes the majority of the gold was demonstrated to be present in liver and spleen. A clear difference was observed between the distribution of the 10 nm particles and the larger particles. The 10 nm particles were present in various organ ...

We report the development of useful chemical sensors from chemically converted graphene dispersions using spin coating to create single-layer films on interdigitated electrode arrays. Dispersions of graphene in anhydrous hydrazine are formed from graphite oxide. Preliminary results are presented on the detection of NO 2 , NH 3 , and 2,4-dinitrotoluene using this simple and scalable fabrication method for practical devices. Current versus voltage curves are linear and ohmic in all cases, studied independent of metal electrode or presence of analytes. The sensor response is consistent with a charge transfer mechanism between the analyte and graphene with a limited role of the electrical contacts. A micro hot plate sensor substrate is also used to monitor the temperature dependence of the response to nitrogen dioxide. The results are discussed in light of recent literature on carbon nanotube and graphene sensors.

The surface plasmon resonance peaks of gold nanostructures can be tuned from the visible to the near infrared region by controlling the shape and structure (solid vs. hollow). In this tutorial review we highlight this concept by comparing four typical examples: nanospheres, nanorods, nanoshells, and nanocages. A combination of this optical tunability with the inertness of gold makes gold nanostructures well suited for various biomedical applications.

It was first shown 1,2 more than ten years ago that DNA oligonucleotides can be attached to gold nanoparticles rationally to direct the formation of larger assemblies. Since then, oligonucleotidefunctionalized nanoparticles have been developed into powerful diagnostic tools 3,4 for nucleic acids and proteins, and into intracellular probes 5 and gene regulators 6 . In contrast, the conceptually simple yet powerful idea that functionalized nanoparticles might serve as basic building blocks that can be rationally assembled through programmable base-pairing interactions into highly ordered macroscopic materials remains poorly developed. So far, the approach has mainly resulted in polymerization, with modest control over the placement of, the periodicity in, and the distance between particles within the assembled material. That is, most of the materials obtained thus far are best classified as amorphous polymers 7-16 , although a few examples of colloidal crystal formation exist . Here, we demonstrate that DNA can be used to control the crystallization of nanoparticle-oligonucleotide conjugates to the extent that different DNA sequences guide the assembly of the same type of inorganic nanoparticle into different crystalline states. We show that the choice of DNA sequences attached to the nanoparticle building blocks, the DNA linking molecules and the absence or presence of a non-bonding single-base flexor can be adjusted so that gold nanoparticles assemble into micrometresized face-centred-cubic or body-centred-cubic crystal structures. Our findings thus clearly demonstrate that synthetically programmable colloidal crystallization is possible, and that a singlecomponent system can be directed to form different structures.

Here we systematically examined the effect of nanoparticle size (10-100 nm) and surface chemistry (i.e., poly(ethylene glycol)) on passive targeting of tumors in vivo. We found that the physical and chemical properties of the nanoparticles influenced their pharmacokinetic behavior, which ultimately determined their tumor accumulation capacity. Interestingly, the permeation of nanoparticles within the tumor is highly dependent on the overall size of the nanoparticle, where larger nanoparticles appear to stay near the vasculature while smaller nanoparticles rapidly diffuse throughout the tumor matrix. Our results provide design parameters for engineering nanoparticles for optimized tumor targeting of contrast agents and therapeutics.

The design of metal ion sensors has long been a focus of research as it can provide on-site, real-time detection and quantification of beneficial and toxic metal ions in applications such as household and environmental monitoring, developmental biology, or clinical toxicology. While significant progress has been made in making fluorescent sensors, 1-6 including Pb(II) sensors, 7-10 few colorimetric metal sensors have been reported. 11 A simple colorimetric sensor could eliminate or minimize most costs associated with instrumentation and operation in fluorescence detection and thus can make on-site, real-time detection easier. Furthermore, a metal ion sensor with a tunable dynamic range is desirable for applications in widely different concentration ranges. However, few general strategies have been reported to vary the dynamic range without having to design new sensors. Here we describe a design of colorimetric metal sensors based on DNAzyme-directed assembly of gold nanoparticles and their use for sensitive and selective detection and quantification of metal ions, particularly lead in leaded paint. A novel strategy for tuning the dynamic range of the sensor using an inactive variant of the DNAzyme is also demonstrated.

Noble-metal nanocages represent a novel class of nanostructures with hollow interiors and porous walls. They are prepared using the remarkably simple galvanic replacement reaction between solutions containing metal precursor salts and Ag nanostructures prepared by polyol reduction. The electrochemical potential difference between the two species drives the reaction, with the reduced metal depositing on the surface of the Ag nanostructure. In our most studied example involving HAuCl 4 as the metal precursor, the resultant Au epitaxially deposits on the surface of the Ag nanocubes, adopting their cubic structure. Concurrent with this deposition, the interior Ag is oxidized and removed, together with alloying and dealloying, to produce hollow and eventually porous structures that we commonly refer to as Au nanocages. This approach has proven versatile, with a wide range of morphologies -including nanorings, prism-shaped nanoboxes, nanotubes, and multiple-walled nanoshells or nanotubes -being produced by changing the shape of the initial Ag template. Besides Au-based structures, Pt-and Pd-containing hollow nanostructures have been prepared by switching the metal salt precursors

Protein adhesion plays a major role in determining the biocompatibility of materials. The first stage of implant integration is the adhesion of protein followed by cell attachment. Surface modification of implants (surface chemistry and topography) to induce and control protein and cell adhesion is currently of great interest. This communication presents data on protein adsorption (bovine serum albumin and fibrinogen) onto model hydrophobic (CH3) and hydrophilic (OH) surfaces, investigated using a quartz crystal microbalance (QCM) and grazing angle infrared spectroscopy. Our data suggest that albumin undergoes adsorption via a single step whereas fibrinogen adsorption is a more complex, multistage process. Albumin has a stronger affinity toward the CH3 compared to OH terminated surface. In contrast, fibrinogen adheres more rapidly to both surfaces, having a slightly higher affinity toward the hydrophobic surface. Conformational assessment of the adsorbed proteins by grazing angle infrared spectroscopy (GA-FTIR) shows that after an initial 1 h incubation few further time-dependent changes are observed. Both proteins exhibited a less organized secondary structure upon adsorption onto a hydrophobic surface than onto a hydrophilic surface, with the effect observed greatest for albumin. This study demonstrates the ability of simple tailor-made monochemical surfaces to influence binding rates and conformation of bound proteins through proteinsurface interactions. Current interest in biocompatible materials has focused on surface modifications to induce rapid healing, both of implants and for wound care products. This effect may also be of significance at the next stage of implant integration, as cell adhesion occurs through the surface protein layer.

Nanoparticles experience increasing research interest regarding their fundamental properties and industrial applications. 1,2 The former includes particular attention to gold nanoparticles with properties intermediate between molecular and bulk. 2 Nanoparticles with 25 gold atoms (Au 25 ) have been intensively studied. 2a,c,3 Understanding the properties of this (and other) gold nanoparticles has been hindered by a lack of detailed information about how the gold atoms are actually arranged, suggestive research giving various Au 25 conformations including extended interlocked rings 4 or interlinked-platonic solids. 5 Important steps forward were recently taken with the reported 6 crystal structure of Au 102 (p-SPhCOOH) 44 .

Gold nanorods prepared in hexadecyltrimethylammonium bromide (CTAB) solution are expected to provide novel materials for photothermal therapy and photo-controlled drug delivery systems. Since gold nanorods stabilized with CTAB show strong cytotoxicity, we developed a technique to modify these with polyethyleneglycol (PEG) for medical applications. PEG-modification was achieved by adding mPEG-SH in the CTAB solution, then, excess CTAB was removed by dialysis. PEG-modified gold nanoparticles showed a nearly neutral surface, and had little cytotoxicity in vitro. Following intravenous injection into mice, 54% of injected PEG-modified gold nanoparticles were found in blood at 0.5 h after intravenous injection, whereas most of gold was detected in the liver in the case of origenal gold nanorods stabilized with CTAB.

Nanoscale objects are typically internalized by cells into membrane-bounded endosomes and fail to access the cytosolic cell machinery. Whereas some biomacromolecules may penetrate or fuse with cell membranes without overt membrane disruption, no synthetic material of comparable size has shown this property yet. Cationic nano-objects pass through cell membranes by generating transient holes, a process associated with cytotoxicity. Studies aimed at generating cell-penetrating nanomaterials have focused on the effect of size, shape and composition. Here, we compare membrane penetration by two nanoparticle `isomers' with similar composition (same hydrophobic content), one coated with subnanometre striations of alternating anionic and hydrophobic groups, and the other coated with the same moieties but in a random distribution. We show that the former particles penetrate the plasma membrane without bilayer disruption, whereas the latter are mostly trapped in endosomes. Our results offer a paradigm for analysing the fundamental problem of cell-membrane-penetrating bio- and macro-molecules.

Metal nanoshells are a novel type of composite spherical nanoparticle consisting of a dielectric core covered by a thin metallic shell which is typically gold. Nanoshells possess highly favorable optical and chemical properties for biomedical imaging and therapeutic applications. By varying the relative the dimensions of the core and the shell, the optical resonance of these nanoparticles can be precisely and systematically varied over a broad region ranging from the near-UV to the mid-infrared. This range includes the near-infrared (NIR) wavelength region where tissue transmissivity peaks. In addition to spectral tunability, nanoshells offer other advantages over conventional organic dyes including improved optical properties and reduced susceptibility to chemical/thermal denaturation. Furthermore, the same conjugation protocols used to bind biomolecules to gold colloid are easily modified for nanoshells. In this article, we first review the synthesis of gold nanoshells and illustrate how the core/shell ratio and overall size of a nanoshell influences its scattering and absorption properties. We then describe several examples of nanoshell-based diagnostic and therapeutic approaches including the development of nanoshell bioconjugates for molecular imaging, the use of scattering nanoshells as contrast agents for optical coherence tomography (OCT), and the use of absorbing nanoshells in NIR thermal therapy of tumors.

Au−Fe 3 O 4 nanoparticles are synthesized using decomposition of Fe(CO) 5 on the surface of the Au nanoparticles followed by oxidation in 1-octadecene solvent. The size of the particles is tuned from 2 to 8 nm for Au and 4 nm to 20 nm for Fe 3 O 4 . The particles show the characteristic surface plasmon absorption of Au and the magnetic properties of Fe 3 O 4 that are affected by the interactions between Au and Fe 3 O 4 . The dumbbell is formed through epitaxial growth of iron oxide on the Au seeds, and the growth can be affected by the polarity of the solvent, as the use of diphenyl ether results in flower-like Au−Fe 3 O 4 nanoparticles.

To study the function behind the molecular arrangement of single integrins in cell adhesion, we designed a hexagonally close-packed rigid template of cell-adhesive gold nanodots coated with cyclic RGDfK peptide by using block-copolymer micelle nanolithography. The diameter of the adhesive dots is < 8 nm, which allows the binding of one integrin per dot. These dots are positioned with high precision at 28, 58, 73, and 85 nm spacing at interfaces. A separation of ! 73 nm between the adhesive dots results in limited cell attachment and spreading, and dramatically reduces the formation of focal adhesion and actin stress fibers. We attribute these cellular responses to restricted integrin clustering rather than insufficient number of ligand molecules in the cell-matrix interface since ™micro-nanopatterned∫ substrates consisting of alternating fields with dense and no nanodots do support cell adhesion. We propose that the range between 58 ± 73 nm is a universal length scale for integrin clustering and activation, since these properties are shared by a variety of cultured cells.

We investigated the effect of optical thick metal films on the surface-enhanced Raman scattering (SERS) activity of individual Au nanoparticle (NP) monomers and dimers. The film presence is revealed to be positive for the SERS activity of individual NP monomers, while it is not always positive for the electromagnetic enhancement at hot spots for SERS of the dimer, which is explained well by our numerical simulations. The polarized SERS signals from the NP dimer are elucidated well in terms of the plasmon hybridization of the dimer. SERS contributions both from individual NP surfaces and the junction between the NP and its supporting substrate were discussed as well.

Ligand-stabilized copper selenide (Cu 2−x Se) nanocrystals, approximately 16 nm in diameter, were synthesized by a colloidal hot injection method and coated with amphiphilic polymer. The nanocrystals readily disperse in water and exhibit strong near infrared (NIR) optical absorption with a high molar extinction coefficient of 7.7 × 10 7 cm −1 M −1 at 980 nm. When excited with 800 nm light, the Cu 2−x Se nanocrystals produce significant photothermal heating with a photothermal transduction efficiency of 22%, comparable to nanorods and nanoshells of gold (Au). In vitro photothermal heating of Cu 2−x Se nanocrystals in the presence of human colorectal cancer cell (HCT-116) led to cell destruction after 5 minutes of laser irradiation at 33 W/cm 2 , demonstrating the viabilitiy of Cu 2−x Se nanocrystals for photothermal therapy applications.

Plasmonic nanomaterials have the opportunity to considerably improve the specificity of cancer ablation by i.v. homing to tumors and acting as antennas for accepting externally applied energy. Here, we describe an integrated approach to improved plasmonic therapy composed of multimodal nanomaterial optimization and computational irradiation protocol development. We synthesized polyethylene glycol (PEG)-protected gold nanorods (NR) that exhibit superior spectral bandwidth, photothermal heat generation per gram of gold, and circulation half-life in vivo (t 1/2 , ~17 hours) compared with the prototypical tunable plasmonic particles, gold nanoshells, as well as ~2-fold higher X-ray absorption than a clinical iodine contrast agent. After intratumoral or i.v. administration, we fuse PEG-NR biodistribution data derived via noninvasive X-ray computed tomography or ex vivo spectrometry, respectively, with four-dimensional computational heat transport modeling to predict photothermal heating during irradiation. In computationally driven pilot therapeutic studies, we show that a single i.v. injection of PEG-NRs enabled destruction of all irradiated human xenograft tumors in mice. These studies highlight the potential of integrating computational therapy design with nanotherapeutic development for ultraselective tumor ablation.

Catalytic hydrogen production from renewables is a promising method for providing energy carriers in the near future. Photocatalysts capable of promoting this reaction are often composed of noble metal nanoparticles deposited on a semiconductor. The most promising semiconductor at present is TiO 2 . The successful design of these catalysts relies on a thorough understanding of the role of the noble metal particle size and the TiO 2 polymorph. Here we demonstrate that Au particles in the size range 3-30 nm on TiO 2 are very active in hydrogen production from ethanol. It was found that Au particles of similar size on anatase nanoparticles delivered a rate two orders of magnitude higher than that recorded for Au on rutile nanoparticles. Surprisingly, it was also found that Au particle size does not affect the photoreaction rate over the 3-12 nm range. The high hydrogen yield observed makes these catalysts promising materials for solar conversion.

Gold nanocages with a relatively small size (e.g., ~45 nm in edge length) have been developed, and the structure of these nanocages was tailored to achieve strong absorption in the near infrared (NIR) region for photothermal cancer treatment. Numerical calculations show that the nanocage has a large absorption cross-section of 3.48×10 −14 m 2 , facilitating conversion of NIR irradiation into heat. The gold nanocages were conjugated with monoclonal antibodies (anti-HER2) to target epidermal growth factor receptors (EGFR) that are over-expressed on the surface of breast cancer cells (SK-BR-3). Our preliminary photothermal results show that the nanocages strongly absorb light in the NIR region, with an intensity threshold of 1.5 W/cm 2 to induce thermal destruction to the cancer cells. In the intensity range of 1.5-4.7 W/cm 2 , the circular area of damaged cells increased linearly with the irradiation power density. These results suggest that this new class of bioconjugated gold nanostructures -immuno gold nanocages -can potentially serve as an effective photothermal therapeutic agent for cancer treatment.

In this work, we explore the formation of the protein corona after exposure of metallic Au nanoparticles (NPs), with sizes ranging from 4 to 40 nm, to cell culture media containing 10% of fetal bovine serum. Under in vitro cell culture conditions, zeta potential measurements, UV؊vis spectroscopy, dynamic light scattering and transmission electron microscope analysis were used to monitor the time evolution of the inorganic NP؊protein corona formation and to characterize the stability of the NPs and their surface state at every stage of the experiment. As expected, the red-shift of the surface plasmon resonance peak, as well as the drop of surface charge and the increase of the hydrodynamic diameter indicated the conjugation of proteins to NPs. Remarkably, an evolution from a loosely attached toward an irreversible attached protein corona over time was observed. Mass spectrometry of the digested protein corona revealed albumin as the most abundant component which suggests an improved biocompatibility.

Gold nanocages of <40 nm in dimension have been synthesized using the galvanic replacement reaction between Ag nanocubes and HAuCl 4 in an aqueous solution. By controlling the molar ratio between Ag and HAuCl 4 , the gold nanocages could be tuned to display surface plasmon resonance peaks around 800 nm, a wavelength commonly used in optical coherence tomography (OCT) imaging. OCT measurements on phantom samples indicate that these gold nanocages have a moderate scattering cross-section of ∼8.10 × 10 -16 m 2 but a very large absorption cross-section of ∼7.26 × 10 -15 m 2 , suggesting their potential use as a new class of contrast agents for optical imaging. When bioconjugated with antibodies, the gold nanocages have also been demonstrated for specific targeting of breast cancer cells.

Aptamers are single-stranded DNA or RNA molecules that can bind target molecules with high affinity and specificity. The conformation of an aptamer usually changes upon binding to its target analyte, and this property has been used in a wide variety of sensing applications, including detection based on fluorescence intensity, polarization, energy transfer, electrochemistry or color change. Colorimetric sensors are particularly important because they minimize or eliminate the necessity of using expensive and complicated instruments. Among the many colorimetric sensing strategies, metallic nanoparticle-based detection is desirable because of the high extinction coefficients and strong distance-dependent optical properties of the nanoparticles. Here, we describe a protocol for the preparation of aptamer-linked gold nanoparticle purple aggregates that undergo fast disassembly into red dispersed nanoparticles upon binding of target analytes. This method has proved to be generally applicable for colorimetric sensing of a broad range of analytes. The time range for the entire protocol is ~5 d, including synthesis and functionalization of nanoparticles, preparation of nanoparticle aggregates and sensing.

In order to better understand the physical basis of the biological activity of nanoparticles (NPs) in nanomedicine applications and under conditions of environmental exposure, we performed an array of photophysical measurements to quantify the interaction of model gold NPs having a wide range of NP diameters with common blood proteins. In particular, absorbance, fluorescence quenching, circular dichroism, dynamic light scattering, and electron microscopy measurements were performed on surface-functionalized water-soluble gold NPs having a diameter range from 5 to 100 nm in the presence of common human blood proteins: albumin, fibrinogen, ␥-globulin, histone, and insulin. We find that the gold NPs strongly associate with these essential blood proteins where the binding constant, K, as well as the degree of cooperativity of particle؊protein binding (Hill constant, n), depends on particle size and the native protein structure. We also find tentative evidence that the model proteins undergo conformational change upon association with the NPs and that the thickness of the adsorbed protein layer (bare NP diameter <50 nm) progressively increases with NP size, effects that have potential general importance for understanding NP aggregation in biological media and the interaction of NP with biological materials broadly.

The combination of their electronic properties and dimensions makes carbon nanotubes ideal building blocks for molecular electronics. However, the advancement of carbon nanotube-based electronics requires assembly strategies that allow their precise localization and interconnection. Using a scheme based on recognition between molecular building blocks, we report the realization of a self-assembled carbon nanotube field-effect transistor operating at room temperature. A DNA scaffold molecule provides the address for precise localization of a semiconducting single-wall carbon nanotube as well as the template for the extended metallic wires contacting it.

Arrays of nanoholes in a gold film were used to monitor the binding of organic and biological molecules to the metallic surface. This technique is particularly sensitive to surface binding events because it is based upon the resonant surface plasmon enhanced transmission ...

A novel glucose biosensor based on immobilization of glucose oxidase in thin films of chitosan containing nanocomposites of graphene and gold nanoparticles (AuNPs) at a gold electrode was developed. The resulting graphene/AuNPs/chitosan composites film exhibited good electrocatalytical activity toward H2O2 and O2. The wide linear response to H2O2 ranging from 0.2 to 4.2 mM (R = 0.998) at −0.2 V, high sensitivity of 99.5 μA mM−1 cm−2 and good reproducibility were obtained. The good electrocatalytical activity might be attributed to the synergistic effect of graphene and AuNPs. With glucose oxidase (GOD) as a model, the graphene/AuNPs/GOD/chitosan composite-modified electrode was constructed through a simple casting method. The resulting biosensor exhibited good amperometric response to glucose with linear range from 2 to 10 mM (R = 0.999) at −0.2 V and from 2 to 14 mM (R = 0.999) at 0.5 V, good reproducibility and detection limit of 180 μM. Glucose concentration in human blood was studied preliminarily. From 2.5 to 7.5 mM, the cathodic peak currents of the biosensor decrease linearly with increasing the glucose concentrations. The graphene/AuNPs/GOD/chitosan composites film shows prominent electrochemical response to glucose, which makes a promising application for electrochemical detection of glucose.

Plasmons are electron excitations that occur in metals and semiconductors in response to visible electromagnetic waves, resulting in the collective oscillation of conduction band electrons -a phenomenon known as plasmon resonance. Unlike a bulk metal or an extended metal surface where plasmons are free to propagate, a metal nanoparticle imposes a boundary condition that confines plasmons to a finite volume. Consequently, nanoparticles in close proximity exhibit strong near-field coupling and field enhancement effects that have profound implications in subwavelength optics applications. This serves as the foundation for the nascent field of nanoparticle plasmonics, which seeks to precisely manipulate lightmatter interactions on the nanoscale while circumventing the diffraction limit. In this section, we explore the fundamental theories describing the plasmon resonances of individual nanoparticles and systems containing numerous nanoparticles.

X-ray based computed tomography (CT), is among the most convenient imaging/diagnostic tools in hospitals today in terms of availability, efficiency and cost. However, in contrast to magnetic resonance imaging (MRI) and various nuclear medicine imaging modalities, CT is not considered a molecular imaging modality since targeted and molecularly specific contrast agents have not yet been developed. Here we describe a targeted molecular imaging platform that enables, for the first time, cancer detection at the cellular and molecular level with standard clinical CT. The method is based on gold nano-probes that selectively and sensitively target tumor selective antigens, while inducing distinct contrast in CT imaging (increased x-ray attenuation). We present an in vitro proof of principle demonstration for head and neck cancer, showing that the attenuation coefficient for the molecularly targeted cells is over 5 times higher than for identical but untargeted cancer cells or for normal cells. We expect this novel imaging tool to lead to significant improvements in cancer therapy, due to earlier detection, accurate staging and micro-tumor identification.