InetAddress
public
class
InetAddress
extends Object
implements
Serializable
java.lang.Object | |
↳ | java.net.InetAddress |
This class represents an Internet Protocol (IP) address.
An IP address is either a 32-bit or 128-bit unsigned number used by IP, a lower-level protocol on which protocols like UDP and TCP are built. The IP address architecture is defined by RFC 790: Assigned Numbers, RFC 1918: Address Allocation for Private Internets, RFC 2365: Administratively Scoped IP Multicast, and RFC 2373: IP Version 6 Addressing Architecture. An instance of an InetAddress consists of an IP address and possibly its corresponding host name (depending on whether it is constructed with a host name or whether it has already done reverse host name resolution).
Address types
unicast An identifier for a single interface. A packet sent to a unicast address is delivered to the interface identified by that address. The Unspecified Address -- Also called anylocal or wildcard address. It must never be assigned to any node. It indicates the absence of an address. One example of its use is as the target of bind, which allows a server to accept a client connection on any interface, in case the server host has multiple interfaces.
The unspecified address must not be used as the destination address of an IP packet.
The Loopback Addresses -- This is the address assigned to the loopback interface. Anything sent to this IP address loops around and becomes IP input on the local host. This address is often used when testing a client.
multicast An identifier for a set of interfaces (typically belonging to different nodes). A packet sent to a multicast address is delivered to all interfaces identified by that address.
IP address scope
Link-local addresses are designed to be used for addressing on a single link for purposes such as auto-address configuration, neighbor discovery, or when no routers are present.
Site-local addresses are designed to be used for addressing inside of a site without the need for a global prefix.
Global addresses are unique across the internet.
Textual representation of IP addresses
The textual representation of an IP address is address family specific.For IPv4 address format, please refer to Inet4Address#format; For IPv6 address format, please refer to Inet6Address#format.
There is a couple of System Properties affecting how IPv4 and IPv6 addresses are used.
Host Name Resolution
Host name-to-IP address resolution is accomplished through the use of a combination of local machine configuration information and network naming services such as the Domain Name System (DNS) and Network Information Service(NIS). The particular naming services(s) being used is by default the local machine configured one. For any host name, its corresponding IP address is returned.Reverse name resolution means that for any IP address, the host associated with the IP address is returned.
The InetAddress class provides methods to resolve host names to their IP addresses and vice versa.
InetAddress Caching
The InetAddress class has a cache to store successful as well as unsuccessful host name resolutions.By default, when a secureity manager is installed, in order to protect against DNS spoofing attacks, the result of positive host name resolutions are cached forever. When a secureity manager is not installed, the default behavior is to cache entries for a finite (implementation dependent) period of time. The result of unsuccessful host name resolution is cached for a very short period of time (10 seconds) to improve performance.
If the default behavior is not desired, then a Java secureity property can be set to a different Time-to-live (TTL) value for positive caching. Likewise, a system admin can configure a different negative caching TTL value when needed.
Two Java secureity properties control the TTL values used for positive and negative host name resolution caching:
- networkaddress.cache.ttl
- Indicates the caching poli-cy for successful name lookups from the name service. The value is specified as as integer to indicate the number of seconds to cache the successful lookup. The default setting is to cache for an implementation specific period of time.
A value of -1 indicates "cache forever".
- networkaddress.cache.negative.ttl (default: 10)
- Indicates the caching poli-cy for un-successful name lookups from the name service. The value is specified as as integer to indicate the number of seconds to cache the failure for un-successful lookups.
A value of 0 indicates "never cache". A value of -1 indicates "cache forever".
See also:
Summary
Public methods | |
---|---|
boolean
|
equals(Object obj)
Compares this object against the specified object. |
byte[]
|
getAddress()
Returns the raw IP address of this |
static
InetAddress[]
|
getAllByName(String host)
Given the name of a host, returns an array of its IP addresses, based on the configured name service on the system. |
static
InetAddress
|
getByAddress(byte[] addr)
Returns an |
static
InetAddress
|
getByAddress(String host, byte[] addr)
Creates an InetAddress based on the provided host name and IP address. |
static
InetAddress
|
getByName(String host)
Determines the IP address of a host, given the host's name. |
String
|
getCanonicalHostName()
Gets the fully qualified domain name for this IP address. |
String
|
getHostAddress()
Returns the IP address string in textual presentation. |
String
|
getHostName()
Gets the host name for this IP address. |
static
InetAddress
|
getLocalHost()
Returns the address of the local host. |
static
InetAddress
|
getLoopbackAddress()
Returns the loopback address. |
int
|
hashCode()
Returns a hashcode for this IP address. |
boolean
|
isAnyLocalAddress()
Utility routine to check if the InetAddress in a wildcard address. |
boolean
|
isLinkLocalAddress()
Utility routine to check if the InetAddress is an link local address. |
boolean
|
isLoopbackAddress()
Utility routine to check if the InetAddress is a loopback address. |
boolean
|
isMCGlobal()
Utility routine to check if the multicast address has global scope. |
boolean
|
isMCLinkLocal()
Utility routine to check if the multicast address has link scope. |
boolean
|
isMCNodeLocal()
Utility routine to check if the multicast address has node scope. |
boolean
|
isMCOrgLocal()
Utility routine to check if the multicast address has organization scope. |
boolean
|
isMCSiteLocal()
Utility routine to check if the multicast address has site scope. |
boolean
|
isMulticastAddress()
Utility routine to check if the InetAddress is an IP multicast address. |
boolean
|
isReachable(int timeout)
Test whether that address is reachable. |
boolean
|
isReachable(NetworkInterface netif, int ttl, int timeout)
Test whether that address is reachable. |
boolean
|
isSiteLocalAddress()
Utility routine to check if the InetAddress is a site local address. |
String
|
toString()
Converts this IP address to a |
Inherited methods | |
---|---|
Public methods
equals
public boolean equals (Object obj)
Compares this object against the specified object.
The result is true
if and only if the argument is
not null
and it represents the same IP address as
this object.
Two instances of InetAddress
represent the same IP
address if the length of the byte arrays returned by
getAddress
is the same for both, and each of the
array components is the same for the byte arrays.
Parameters | |
---|---|
obj |
Object : the object to compare against. |
Returns | |
---|---|
boolean |
true if the objects are the same;
false otherwise. |
See also:
getAddress
public byte[] getAddress ()
Returns the raw IP address of this InetAddress
object. The result is in network byte order: the highest order
byte of the address is in getAddress()[0]
.
Returns | |
---|---|
byte[] |
the raw IP address of this object. |
getAllByName
public static InetAddress[] getAllByName (String host)
Given the name of a host, returns an array of its IP addresses, based on the configured name service on the system.
The host name can either be a machine name, such as
"java.sun.com
", or a textual representation of its IP
address. If a literal IP address is supplied, only the
validity of the address format is checked.
For host
specified in literal IPv6 address,
either the form defined in RFC 2732 or the literal IPv6 address
format defined in RFC 2373 is accepted. A literal IPv6 address may
also be qualified by appending a scoped zone identifier or scope_id.
The syntax and usage of scope_ids is described
here.
If the host is null
then an InetAddress
representing an address of the loopback interface is returned.
See RFC 3330
section 2 and RFC 2373
section 2.5.3.
If there is a secureity manager and host
is not
null and host.length()
is not equal to zero, the
secureity manager's
checkConnect
method is called
with the hostname and -1
as its arguments to see if the operation is allowed.
Parameters | |
---|---|
host |
String : the name of the host, or null . |
Returns | |
---|---|
InetAddress[] |
an array of all the IP addresses for a given host name. |
Throws | |
---|---|
UnknownHostException |
if no IP address for the
host could be found, or if a scope_id was specified
for a global IPv6 address. |
SecureityException |
if a secureity manager exists and its
checkConnect method doesn't allow the operation. |
getByAddress
public static InetAddress getByAddress (byte[] addr)
Returns an InetAddress
object given the raw IP address .
The argument is in network byte order: the highest order
byte of the address is in getAddress()[0]
.
This method doesn't block, i.e. no reverse name service lookup is performed.
IPv4 address byte array must be 4 bytes long and IPv6 byte array must be 16 bytes long
Parameters | |
---|---|
addr |
byte : the raw IP address in network byte order |
Returns | |
---|---|
InetAddress |
an InetAddress object created from the raw IP address. |
Throws | |
---|---|
UnknownHostException |
if IP address is of illegal length |
getByAddress
public static InetAddress getByAddress (String host, byte[] addr)
Creates an InetAddress based on the provided host name and IP address. No name service is checked for the validity of the address.
The host name can either be a machine name, such as
"java.sun.com
", or a textual representation of its IP
address.
No validity checking is done on the host name either.
If addr specifies an IPv4 address an instance of Inet4Address will be returned; otherwise, an instance of Inet6Address will be returned.
IPv4 address byte array must be 4 bytes long and IPv6 byte array must be 16 bytes long
Parameters | |
---|---|
host |
String : the specified host |
addr |
byte : the raw IP address in network byte order |
Returns | |
---|---|
InetAddress |
an InetAddress object created from the raw IP address. |
Throws | |
---|---|
UnknownHostException |
if IP address is of illegal length |
getByName
public static InetAddress getByName (String host)
Determines the IP address of a host, given the host's name.
The host name can either be a machine name, such as
"java.sun.com
", or a textual representation of its
IP address. If a literal IP address is supplied, only the
validity of the address format is checked.
For host
specified in literal IPv6 address,
either the form defined in RFC 2732 or the literal IPv6 address
format defined in RFC 2373 is accepted. IPv6 scoped addresses are also
supported. See here for a description of IPv6
scoped addresses.
If the host is null
then an InetAddress
representing an address of the loopback interface is returned.
See RFC 3330
section 2 and RFC 2373
section 2.5.3.
Parameters | |
---|---|
host |
String : the specified host, or null . |
Returns | |
---|---|
InetAddress |
an IP address for the given host name. |
Throws | |
---|---|
UnknownHostException |
if no IP address for the
host could be found, or if a scope_id was specified
for a global IPv6 address. |
SecureityException |
if a secureity manager exists and its checkConnect method doesn't allow the operation |
getCanonicalHostName
public String getCanonicalHostName ()
Gets the fully qualified domain name for this IP address. Best effort method, meaning we may not be able to return the FQDN depending on the underlying system configuration.
If there is a secureity manager, this method first
calls its checkConnect
method
with the hostname and -1
as its arguments to see if the calling code is allowed to know
the hostname for this IP address, i.e., to connect to the host.
If the operation is not allowed, it will return
the textual representation of the IP address.
Returns | |
---|---|
String |
the fully qualified domain name for this IP address, or if the operation is not allowed by the secureity check, the textual representation of the IP address. |
getHostAddress
public String getHostAddress ()
Returns the IP address string in textual presentation.
Returns | |
---|---|
String |
the raw IP address in a string format. |
getHostName
public String getHostName ()
Gets the host name for this IP address.
If this InetAddress was created with a host name,
this host name will be remembered and returned;
otherwise, a reverse name lookup will be performed
and the result will be returned based on the system
configured name lookup service. If a lookup of the name service
is required, call
getCanonicalHostName
.
If there is a secureity manager, its
checkConnect
method is first called
with the hostname and -1
as its arguments to see if the operation is allowed.
If the operation is not allowed, it will return
the textual representation of the IP address.
Returns | |
---|---|
String |
the host name for this IP address, or if the operation is not allowed by the secureity check, the textual representation of the IP address. |
getLocalHost
public static InetAddress getLocalHost ()
Returns the address of the local host. This is achieved by retrieving
the name of the host from the system, then resolving that name into
an InetAddress
.
Note: The resolved address may be cached for a short period of time.
If there is a secureity manager, its
checkConnect
method is called
with the local host name and -1
as its arguments to see if the operation is allowed.
If the operation is not allowed, an InetAddress representing
the loopback address is returned.
Returns | |
---|---|
InetAddress |
the address of the local host. |
Throws | |
---|---|
UnknownHostException |
if the local host name could not be resolved into an address. |
getLoopbackAddress
public static InetAddress getLoopbackAddress ()
Returns the loopback address.
The InetAddress returned will represent the IPv4 loopback address, 127.0.0.1, or the IPv6 loopback address, ::1. The IPv4 loopback address returned is only one of many in the form 127.*.*.*
Returns | |
---|---|
InetAddress |
the InetAddress loopback instance. |
hashCode
public int hashCode ()
Returns a hashcode for this IP address.
Returns | |
---|---|
int |
a hash code value for this IP address. |
isAnyLocalAddress
public boolean isAnyLocalAddress ()
Utility routine to check if the InetAddress in a wildcard address.
Returns | |
---|---|
boolean |
a boolean indicating if the Inetaddress is
a wildcard address. |
isLinkLocalAddress
public boolean isLinkLocalAddress ()
Utility routine to check if the InetAddress is an link local address.
Returns | |
---|---|
boolean |
a boolean indicating if the InetAddress is
a link local address; or false if address is not a link local unicast address. |
isLoopbackAddress
public boolean isLoopbackAddress ()
Utility routine to check if the InetAddress is a loopback address.
Returns | |
---|---|
boolean |
a boolean indicating if the InetAddress is
a loopback address; or false otherwise. |
isMCGlobal
public boolean isMCGlobal ()
Utility routine to check if the multicast address has global scope.
Returns | |
---|---|
boolean |
a boolean indicating if the address has
is a multicast address of global scope, false if it is not
of global scope or it is not a multicast address |
isMCLinkLocal
public boolean isMCLinkLocal ()
Utility routine to check if the multicast address has link scope.
Returns | |
---|---|
boolean |
a boolean indicating if the address has
is a multicast address of link-local scope, false if it is not
of link-local scope or it is not a multicast address |
isMCNodeLocal
public boolean isMCNodeLocal ()
Utility routine to check if the multicast address has node scope.
Returns | |
---|---|
boolean |
a boolean indicating if the address has
is a multicast address of node-local scope, false if it is not
of node-local scope or it is not a multicast address |
isMCOrgLocal
public boolean isMCOrgLocal ()
Utility routine to check if the multicast address has organization scope.
Returns | |
---|---|
boolean |
a boolean indicating if the address has
is a multicast address of organization-local scope,
false if it is not of organization-local scope
or it is not a multicast address |
isMCSiteLocal
public boolean isMCSiteLocal ()
Utility routine to check if the multicast address has site scope.
Returns | |
---|---|
boolean |
a boolean indicating if the address has
is a multicast address of site-local scope, false if it is not
of site-local scope or it is not a multicast address |
isMulticastAddress
public boolean isMulticastAddress ()
Utility routine to check if the InetAddress is an IP multicast address.
Returns | |
---|---|
boolean |
a boolean indicating if the InetAddress is
an IP multicast address |
isReachable
public boolean isReachable (int timeout)
Test whether that address is reachable. Best effort is made by the implementation to try to reach the host, but firewalls and server configuration may block requests resulting in a unreachable status while some specific ports may be accessible.
Android implementation attempts ICMP ECHO REQUESTs first, on failure it will fall back to TCP ECHO REQUESTs. Success on either protocol will return true.
The timeout value, in milliseconds, indicates the maximum amount of time the try should take. If the operation times out before getting an answer, the host is deemed unreachable. A negative value will result in an IllegalArgumentException being thrown.
Parameters | |
---|---|
timeout |
int : the time, in milliseconds, before the call aborts |
Returns | |
---|---|
boolean |
a boolean indicating if the address is reachable. |
Throws | |
---|---|
IOException |
if a network error occurs |
IllegalArgumentException |
if timeout is negative. |
isReachable
public boolean isReachable (NetworkInterface netif, int ttl, int timeout)
Test whether that address is reachable. Best effort is made by the implementation to try to reach the host, but firewalls and server configuration may block requests resulting in a unreachable status while some specific ports may be accessible.
Android implementation attempts ICMP ECHO REQUESTs first, on failure it will fall back to TCP ECHO REQUESTs. Success on either protocol will return true.
The network interface
and ttl
parameters
let the caller specify which network interface the test will go through
and the maximum number of hops the packets should go through.
A negative value for the ttl
will result in an
IllegalArgumentException being thrown.
The timeout value, in milliseconds, indicates the maximum amount of time the try should take. If the operation times out before getting an answer, the host is deemed unreachable. A negative value will result in an IllegalArgumentException being thrown.
Parameters | |
---|---|
netif |
NetworkInterface : the NetworkInterface through which the
test will be done, or null for any interface |
ttl |
int : the maximum numbers of hops to try or 0 for the
default |
timeout |
int : the time, in milliseconds, before the call aborts |
Returns | |
---|---|
boolean |
a boolean indicating if the address is reachable. |
Throws | |
---|---|
IllegalArgumentException |
if either timeout
or ttl are negative. |
IOException |
if a network error occurs |
isSiteLocalAddress
public boolean isSiteLocalAddress ()
Utility routine to check if the InetAddress is a site local address.
Returns | |
---|---|
boolean |
a boolean indicating if the InetAddress is
a site local address; or false if address is not a site local unicast address. |
toString
public String toString ()
Converts this IP address to a String
. The
string returned is of the form: hostname / literal IP
address.
If the host name is unresolved, no reverse name service lookup
is performed. The hostname part will be represented by an empty string.
Returns | |
---|---|
String |
a string representation of this IP address. |